Skip to content
Isotec Balcony Connector Application

Isotec Balcony Connectors

Isotec Concrete-to-Concrete Connectors

Ancon Isotec

Ancon Isotec is a high performance thermal break system for concrete-concrete applications, comprising 100% stainless steel reinforcement and fire-resistant mineral wool insulation.

It is particularly suitable for highly energy-efficient structures and compression studs facilitate installation in heavily congested or stepped floor slabs where compression bars would be difficult to accommodate. Each unit is manufactured as a non-deformable cage offering high rigidity and dimensional stability.

Download the brochure for full product and performance details.

Reinforcement

Tensile and shear reinforcement consist of either 1.4301 or 1.4362 highly corrosion-resistant stainless steel, with a minimum characteristic strength Rp0.2 of 500 N/mm2. Tensile bars are continuous with no structural welding or point of weakness.

Compression studs are manufactured from 12mm diameter, high resistance 1.4301 stainless steel bars with hot-forged heads.

In addition to thermal and durability benefits, stainless steel reinforcement reduces concrete cover requirements and can therefore provide additional design efficiencies over carbon steel systems.

Isotec System Components

Insulation

Fire-resistant ROCKWOOL® mineral wool insulation is protected by a stainless steel U-shaped profile top and bottom. The insulation component of this system has been enhanced significantly compared to its predecessor, Isolan.

Continuous offset slots reduce the cross-sectional area of steel used, minimising the thermal conductivity of this Class A1 non-combustible component. A label is affixed to the top identifying the system type and direction of placement.

Technical Approval

Isotec has been thoroughly independently assessed by the French CSTB and holds Avis Technique number 20/11-232. An English translation of this technical approval document is available on request.

System Benefits

  • Inherently fire-resistant mineral wool insulation
  • Formed from 100% Class A1 non-combustible components
  • Compression studs reduce rebar congestion and simplify installation
  • Continuous stainless steel reinforcement maximises strength, thermal efficiency and corrosion protection
  • Supplied as a complete unit providing rigidity and dimensional stability
  • Extensive product line to suit a wide range of applications

Ancon Isotec ISO 80 DMV B 200

Typical Applications

Isotec is particularly suitable for highly energy-efficient structures, heavily congested or stepped floor slabs where compression bars would be difficult to accommodate, applications where maximum corrosion protection is required and when an integral fire resistance is preferred to the installation of a separate fire protection barrier.

Standard Configurations

ACTP-DMV-080

ACTP-V-080

ACTP-DV-080

ACTP-MV-080 SH

ACTP-MV-080 SB

ACTP-MV-080 WH

ACTP-MV-080 WB

ACTP-V-080 WBTT

ACTP-DV-080 WBH

ACTP-00-080

Latest News

Celebrating the future of bricklaying at the ABC Awards 2024

Leviat reaffirmed its commitment to the future of the UK bricklaying industry at the 2024 Association of Brickwork Contractors Awards late last month, again sponsoring the popular ‘Bricklaying Apprentice of the Year’ category.

Season's Greetings from Leviat

As 2023 draws to a close, Leviat would like to wish our wonderful customers and exceptional team a season filled with an abundance of joy, warmth, and cherished moments with your loved ones!