Wall Ties & Restraint Fixings
Ties for Brick-to-Block Construction
Ancon ST1 Wall Tie
Staifix RT2 Wall Tie
Staifix RT3 Wall Tie
Staifix HRT4 Wall Tie
Ancon TeploTie 1 Wall Tie
Ancon TeploTie 2 Wall Tie
Ancon TeploTie 4 Wall Tie
Ancon ST1 Wall Tie
Type 1 Tie to PD 6697 (Masonry Heavy Duty)*
The Ancon ST1 is suitable for cavities from 50mm to 175mm and can be used for all types of building of any height, anywhere in the British Isles. The section that spans the cavity has a series of holes to provide water drips. This allows the same tie to be used in insulated cavities as well as open cavities.
Staifix RT2 Wall Tie
Staifix RT3 Wall Tie
Staifix HRT4 Wall Tie
Ancon TeploTie 1 Wall Tie
Ancon TeploTie 2 Wall Tie
Ancon TeploTie 4 Wall Tie
Ancon ST1 Wall Tie
Type 1 Tie to PD 6697 (Masonry Heavy Duty)*
The Ancon ST1 is suitable for cavities from 50mm to 175mm and can be used for all types of building of any height, anywhere in the British Isles. The section that spans the cavity has a series of holes to provide water drips. This allows the same tie to be used in insulated cavities as well as open cavities.
|
Lengths: 200mm for 50-75mm cavities 225mm for 76-100mm cavities 250mm for 101-125mm cavities 275mm for 126-150mm cavities 300mm for 150-175mm cavities U.K. Patent Nos. 2 255 358 2 260 348 2 260 349 |
.jpg)
|
Staifix RT2 General Purpose Wall Tie
Type 2 Tie to PD 6697 (Masonry General Purpose)*
Replaces the Double Triangle Tie
The Staifix RT2 is suitable for cavities from 50mm to 125mm and can be used in the construction of domestic houses and small commercial buildings up to 15 metres in height. Altitude and wind speed restrictions may apply.
The Staifix RT2 has BBA approval and meets the technical requirements of the NHBC.
Type 2 Tie to PD 6697 (Masonry General Purpose)*
Replaces the Double Triangle Tie
The Staifix RT2 is suitable for cavities from 50mm to 125mm and can be used in the construction of domestic houses and small commercial buildings up to 15 metres in height. Altitude and wind speed restrictions may apply.
The Staifix RT2 has BBA approval and meets the technical requirements of the NHBC.
|
Lengths: 200mm for 50-75mm cavities 225mm for 76-100mm cavities 250mm for 101-125mm cavities Patent No. GB 2359831 IE 83574 |
.jpg)
|
|
Lengths: 200mm for 50-75mm cavities 225mm for 76-100mm cavities 250mm for 101-125mm cavities |
.jpg)
|
Staifix HRT4 Housing Wall Tie (Type 4/Type A)
Type 4 Tie to PD 6697 (Masonry Light Duty)*
Replaces the Butterfly Tie
The Staifix HRT4 is suitable for cavities from 50mm to 150mm and can be used in the construction of domestic houses up to 10 metres in height. Altitude and wind speed restrictions may apply.
Independent tests have proven the Staifix HRT4 has a measured dynamic stiffness of <4.8MN/m3 at a cavity of 50-100mm and 125-150mm and is therefore suitable for internal separating (party) walls of any height in new-build attached dwellings with these cavities.
The Staifix HRT4 (200mm and 225mm) has BBA approval and all lengths meet the technical requirements of the NHBC.
The HRT4 can be used with all approved robust details for cavity masonry separating walls, whether traditional or thin-joint blockwork. Use of these details eliminates the need for pre-completion sound testing.
Type 4 Tie to PD 6697 (Masonry Light Duty)*
Replaces the Butterfly Tie
The Staifix HRT4 is suitable for cavities from 50mm to 150mm and can be used in the construction of domestic houses up to 10 metres in height. Altitude and wind speed restrictions may apply.
Independent tests have proven the Staifix HRT4 has a measured dynamic stiffness of <4.8MN/m3 at a cavity of 50-100mm and 125-150mm and is therefore suitable for internal separating (party) walls of any height in new-build attached dwellings with these cavities.
The Staifix HRT4 (200mm and 225mm) has BBA approval and all lengths meet the technical requirements of the NHBC.
The HRT4 can be used with all approved robust details for cavity masonry separating walls, whether traditional or thin-joint blockwork. Use of these details eliminates the need for pre-completion sound testing.
|
Lengths: 200mm for 50-75mm cavities 225mm for 76-100mm cavities 250mm for 101-125mm cavities 275mm for 126-150mm cavities Patent No. GB 2359831 IE 83574 |
.jpg)
|
|
The type 1 Teplo1 is BBA-approved in lengths of 200, 225, 250 and 275mm to suit cavities from 50mm to 150mm. Due to the testing completed to date, this tie is restricted to buildings up to 18 metres in height. |
.jpg)
|
|
The type 2 Teplo2 is BBA-approved in lengths of 200, 225, 250, 275, 300, 325, 350, 375, 400 and 425mm to suit cavities from 50mm to 300mm. |
.jpg)
|
TeploTies can be resin-fixed in remedial and retrofit applications. Click here for more information.
|
The type 4 Teplo4 is BBA-approved in lengths of 200, 225 and 250mm to suit cavities from 50mm to 125mm. |
.jpg)
|
*Altitude and wind speed restrictions apply. For complete information on the field of use of wall ties please refer to PD 6697: 2010 (Table 12) and Approved Document E
Ancon will be exhibiting at
www.ancon.com.au
www.ancon.at
www.ancon.ch
www.anconbp.de
