The Staifix Range

Make a selection from the drop down menu above.

The Staifix range of wall ties is manufactured by Ancon Building Products and is supplied through builders merchants and other specialist distributors.

Contact Ancon on 0114 238 1 238 for details of your nearest stockist.

Staifix HRT4 Tie
Staifix RT3 Tie
Staifix RT2 General Purpose Wall Tie
Staifix-Thor Helical TJ2 Tie
Staifix Timber Frame Tie
Staifix Frame Tie

• Manufactured from corrosion resistant stainless steel
• Specially designed safety ends prevent injury and provide excellent mortar key
• Multiple drips prevent moisture crossing the cavity
• Packed to prevent entanglement
• Staifix HRT4 is a Type A tie suitable for internal separating walls of buildings of any height

(replaces Butterfly tie)

The Staifix HRT4 is a type 4 wall tie for use in the external walls of houses not greater than 10 metres in height. Altitude and wind speed restrictions apply*. It is also a Type A tie for internal separating walls of buildings of any height (cavities: 50-100mm; 125mm). BBA approval covers 200mm and 225mm lengths.

The Staifix RT3 is a type 3 tie for use in external walls of houses and small commercial developments not greater than 15 metres in height. Altitude and wind speed restrictions apply*. Contact Ancon to confirm suitability. This tie is unsuitable for internal separating walls of new build attached dwellings.

(replaces Double Triangle tie)

The Staifix RT2 wall tie is for use in the external walls of houses and small commercial developments not greater than 15 metres in height. Altitude and wind speed restrictions apply*. This tie is unsuitable for internal separating walls of new build attached dwellings.

The Staifix-Thor Helical TJ2 is a hammer-driven cavity wall tie, ideal for thin-joint blockwork and other applications where the joints of the inner and outer leaves of masonry do not course.

Cavity wall tie for use in the construction of timber-framed buildings up to 4 storeys in height. Altitude and wind speed restrictions apply*. Supplied complete with an annular ring shank nail.

A screw-in tie used to join timber door and window frames to brickwork.

*Altitude and wind speed restrictions apply. For complete information on the field of use of wall ties please refer to
BS 5628-1 table C1, BS 5268-6.1 and Approved Document E