Wall Ties & Restraint Fixings
About Staifix
The Staifix range of wall ties is manufactured by Ancon Building Products and is supplied through builders merchants and other specialist distributors.
Contact Ancon on 0114 238 1 238 for details of your nearest stockist.
Contact Ancon on 0114 238 1 238 for details of your nearest stockist.
Staifix Wall Ties
- Manufactured from corrosion resistant stainless steel
- Specially designed safety ends prevent injury and provide excellent mortar key
- Multiple drips prevent moisture crossing the cavity
- Packed to prevent entanglement
- Staifix HRT4 is a Type A tie suitable for internal separating walls of buildings of any height
The Staifix HRT4 is a type 4 wall tie for use in the external walls of houses not greater than 10 metres in height. Altitude and wind speed restrictions apply*. It is also a Type A tie for internal separating walls of buildings of any height (cavities: 50-100mm; 125-150mm). BBA approval covers 200mm and 225mm lengths.
|
Staifix HRT4 Length (mm) |
Cavity (mm) |
| 200 | 50-75 |
| 225 | 76-100 |
| 250 | 101-125 |
| 275 | 126-150 |
Staifix RT3 Tie (Type 3)
The Staifix RT3 is a type 3 tie for use in external walls of houses and small commercial developments not greater than 15 metres in height. Altitude and wind speed restrictions apply*. Contact Ancon to confirm suitability. This tie is unsuitable for internal separating walls of new build attached dwellings.
|
Staifix RT3 Length (mm) |
Cavity (mm) |
| 200 | 50-75 |
| 225 | 76-100 |
| 250 | 101-125 |
| 275 | 126-150 |
Staifix RT2 General Purpose Tie (Type 2 tie)
(replaces Double Triangle tie)
The Staifix RT2 wall tie is for use in the external walls of houses and small commercial developments not greater than 15 metres in height. Altitude and wind speed restrictions apply*. This tie is unsuitable for internal separating walls of new build attached dwellings.
The Staifix RT2 wall tie is for use in the external walls of houses and small commercial developments not greater than 15 metres in height. Altitude and wind speed restrictions apply*. This tie is unsuitable for internal separating walls of new build attached dwellings.
|
Staifix RT2 Length (mm) |
Cavity (mm) |
| 200 | 50-75 |
| 225 | 76-100 |
| 250 | 101-125 |
Staifix-Thor Helical TJ2 Tie
The Staifix-Thor Helical TJ2 is a hammer-driven cavity wall tie, ideal for thin-joint blockwork and other applications where the joints of the inner and outer leaves of masonry do not course.
|
Staifix-Thor Helical TJ2 Length (mm) |
Cavity (mm) |
| 205 | 50 |
| 230 | 75 |
| 255 | 100 |
| 280 | 125 |
| 305 | 150 |
Staifix Timber Frame Tie, STF6
(Type 6)
Cavity wall tie for use in the construction of timber-framed buildings up to 4 storeys in height. Altitude and wind speed restrictions apply*. Supplied complete with an annular ring shank nail.
Cavity wall tie for use in the construction of timber-framed buildings up to 4 storeys in height. Altitude and wind speed restrictions apply*. Supplied complete with an annular ring shank nail.
|
Staifix Timber Frame Tie To suit cavities (mm) |
| 50, 75, 100 |
Staifix-Thor Helical Timber Tie, TIM6
(Type 6)
For applications where insulation has to be retained in the cavity. Available in four lengths to suit cavities from 50mm to 150mm.
For applications where insulation has to be retained in the cavity. Available in four lengths to suit cavities from 50mm to 150mm.
*Altitude and wind speed restrictions apply. For complete information on the field of use of wall ties please refer to
PD 6697 table 12, BS 5268-6.1 and Approved Document E
PD 6697 table 12, BS 5268-6.1 and Approved Document E
www.ancon.com.au
www.ancon.at
www.ancon.ch
www.anconbp.de
