Products
Masonry
Wall ties and restraint fixings are an essential element in the stability of masonry panels.
Wall Ties & Restraint Fixings
Brick, block or stone cladding on steel or concrete framed structures is normally supported by stainless steel masonry support systems.
Masonry Support
Ancon Lintels are manufactured from stainless steel and do not require any further corrosion protection.
Lintels
Ancon Masonry Reinforcement, otherwise known as Bed Joint-Reinforcement, improves the structural performance of masonry walls by providing additional resistance to lateral loads e.g. wind.
Masonry Reinforcement
Ancon Windposts are designed to span vertically between floors to provide lateral support for panels of brickwork.
Windposts
There are various methods of fixing to concrete or steel frames.
Channel & Bolt Fixings
Concrete
Leviat manufactures six Ancon products which provide continuity of reinforcement at slab-to-wall construction joints in concrete.
Reinforcement Continuity Systems
Ancon connectors minimise heat loss at balcony locations while maintaining structural integrity.
Insulated Balcony Connectors
Used within a slab to provide additional reinforcement around columns, Ancon Shearfix is the ideal solution to the design and construction problems associated with punching shear.
Punching Shear Reinforcement
Concrete structures are designed with expansion and contraction joints to allow movement to take place.
Shear Load Connectors
Ancon KSN Anchors, in combination with Bartec Plus parallel-threaded reinforcing bars, simplify concrete construction joints.
KSN Anchors
The use of Ancon Reinforcing Bar Couplers can simplify the design and construction of reinforced concrete and reduce the amount of reinforcement required.
Reinforcing Bar Couplers
The CB Coupler Box utilises the Ancon CARES-approved CXL mechanical rebar connection system to simplify the continuity of reinforcement at concrete construction joints.
CB Coupler Box
There are various methods of fixing to concrete or steel frames.
Channel & Bolt Fixings
Steel
Tie bars are increasingly being used in structures and buildings as an architectural as well as a structural element.
Tension & Compression Systems
Leviat is a manufacturer of Ancon specialist products and has a wealth of experience in working with a range of types and grades of stainless steel.
Stainless Steel Fabrications
In addition to the supply of structural fixings, Leviat is a leading supplier of Ancon stainless steel sections and flooring.
Sections & Flooring
Ancon Staifix wire balloons are a simple and effective way of preventing nesting birds, leaves and other debris from entering chimney flues and downpipes.
Wire Balloons
The Ancon ACC is a blue, galvanised steel, self-tapping screw specially designed for use in the construction of loadbearing timber-concrete composite floors.
Composite Floor Fixings
Leviat is one of Europe's leading manufacturers of refractory fixings.
Refractory Fixings
Latest News
Catch up on the latest developments from Ancon
Updated Guidance on Dealing with Redundant Cast-in Channels in Close Proximity
Here, masonry support specialist, Leviat, provides details of how redundant cast-in channels should be treated when located in close proximity to post-fixed anchors.
Celebrating the future of bricklaying at the ABC Awards 2024
Leviat reaffirmed its commitment to the future of the UK bricklaying industry at the 2024 Association of Brickwork Contractors Awards late last month, again sponsoring the popular ‘Bricklaying Apprentice of the Year’ category.
Season's Greetings from Leviat
As 2023 draws to a close, Leviat would like to wish our wonderful customers and exceptional team a season filled with an abundance of joy, warmth, and cherished moments with your loved ones!