The Staifix range of wall ties is manufactured by Ancon Building Products and is supplied through builders merchants and other specialist distributors.
Contact Ancon on 0114 238 1 238 for details of your nearest stockist.
Staifix Wall Ties
- Staifix HRT4 Tie
- Staifix RT2 General Purpose Wall Tie
- Staifix-Thor Helical TJ2 Tie
- Staifix Timber Frame Tie
- Staifix-Thor Helical Timber Tie
- Staifix Frame Tie
The New Generation of Cavity Wall Ties
- Manufactured from corrosion resistant stainless steel
- Specially designed safety ends prevent injury and provide excellent mortar key
- Multiple drips prevent moisture crossing the cavity
- Packed to prevent entanglement
- Staifix HRT4 is a Type A tie suitable for internal separating walls of buildings of any height
Staifix HRT4 Tie (Type 4/Type A)
(replaces Butterfly tie)
The Staifix HRT4 is a type 4 wall tie for use in the external walls of houses not greater than 10 metres in height. Altitude and wind speed restrictions apply*. It is also a Type A tie for internal separating walls of buildings of any height (cavities: 50-100mm; 125-150mm).
|Staifix HRT4 Length (mm)||Cavity (mm)|
Staifix RT2 General Purpose Tie (Type 2 tie)
(replaces Double Triangle tie)
The Staifix RT2 wall tie is for use in the external walls of houses and small commercial developments not greater than 15 metres in height. Altitude and wind speed restrictions apply*. This tie is unsuitable for internal separating walls of new build attached dwellings.
|Staifix RT2 Length (mm)||Cavity (mm)|
Staifix-Thor Helical TJ2 Tie
The Staifix-Thor Helical TJ2 is a hammer-driven cavity wall tie, ideal for thin-joint blockwork and other applications where the joints of the inner and outer leaves of masonry do not course.
|Staifix-Thor Helical TJ2 Length (mm)||Cavity (mm)|
Staifix Timber Frame Tie, STF6
Cavity wall tie for use in the construction of timber-framed buildings up to 4 storeys in height. Altitude and wind speed restrictions apply*. Supplied complete with an annular ring shank nail.
|Staifix Timber Frame Tie To suit cavities (mm)|
|50, 75, 100|
Staifix-Thor Helical Timber Tie, TIM6
For applications where insulation has to be retained in the cavity. Available in four lengths to suit cavities from 50mm to 150mm.
Staifix Frame Tie
A screw-in tie used to join timber door and window frames to brickwork.
*Altitude and wind speed restrictions apply. For complete information on the field of use of wall ties please refer to
PD 6697 table 12, BS 5268-6.1 and Approved Document E
Building Information Modelling
Latest Blog Posts
Insufficient embedment of wall ties in the mortar joints of masonry cavity walls compromises wall tie performance and could lead to the collapse of walls.
This post discusses the most common problems associated with the incorrect use of cavity wall ties and how to overcome these.
Wall ties, sometimes called ‘brick ties’, are used in buildings with cavity walls. They are used to join the two leaves of a cavity wall together.
Ancon is pleased to announce that it has successfully transitioned its Quality and Environmental Management Systems to ISO 9001:2015 and ISO 14001:2015 respectively, well ahead of the September 2018 industry deadline.
Now available in lengths of 325mm and 350mm, the Ancon ST1 wall tie range has been extended to suit high-rise masonry buildings with insulated cavities up to 225mm wide.