Warm Roof Nails
Warm Roof Construction
Helical nails are a quick and reliable fixing for use in warm roof applications. Unlike traditional nails, they rotate as they are driven in, inducing a self-tapping action and consequently do not split or bounce timbers. Staifix products are available from builders merchants and other specialist distributors.
Staifix Super-8 Headed Helical Nail
Staifix Super-8 headed helical nails fix plywood/insulation composite roof panels to joists.
Click here for more information on the Super-8.
Staifix-Thor Helical Super-7 Nail
Staifix-Thor Helical Super-7 helical nails fix counterbattens to rafters, without compressing the layer of insulation in-between.
Click here for more information on the Super-7 range.
Super-8 Headed Helical Nail for Flat Roofs
Super-8 headed helical nails secure plywood/insulation composite roof decks to timber joists. They are manufactured in three standard lengths which suit panel depths from 85mm to 160mm.
For applications with joist centres of either 400mm or 600mm, nails are typically installed at a minimum density of 6.9 per square metre.
The 18mm diameter head simplifies installation.
|145mm (panel depth 85-110mm)|
|170mm (panel depth 115-135mm)|
|195mm (panel depth 140-160mm)|
Other lengths are available on request (min. 135mm).
|Bags of 25|
|Boxes of 400|
Super-7 Thor-Helical Nail for Pitched Roofs
Super-7 nails fix counterbattens to rafters and install flush to the timber. They are manufactured from stainless steel and are engineered with the precise Thor-Helical patented helix, and so provide maximum corrosion resistance and excellent holding power. The nails can be used in line with NHBC standards.
Other lengths are available in increments of 5mm.
Note: Ancon recommends a minimum counter batten thickness of 38mm.
|160mm - Box of 400|
|165mm - Box of 200|
Super-7 Alignment Tool
This innovative tool vertically aligns and centres a nail on the counterbatten to rafter arrangement, improving build quality.
Recommended Super-7 Nail Length and Fixing Centres
This information should be calculated using HeliCalc, a free web-based program which calculates the length, density and quantity of Super-7 nails required for a specific project.
Visit www.helicalc.co.uk or contact Ancon for more information.
Alternatively, please download the Staifix-Thor Helical Warm Roof Batten Fixings design sheet below, complete and fax back to Ancon on +44 (0) 114 276 8543.
Staifix-Thor Helical Warm Roof Batten Fixings Design Sheet (PDF, 68.7 KB)
Teplo-BFR is an innovative basalt-fibre wall tie that features a plain end for resin anchoring into an existing structure and a moulded safety end for building into a new bed joint.
Nexus, the next generation of brick-faced support systems developed through a collaboration between Ibstock Kevington and Ancon, is the first of its kind to achieve British Board of Agrément (BBA) certification for both soffits and lintels.