Wall Ties & Restraint Fixings
Approved Document E
Approved Document E: Resistance to the Passage of Sound
This document specifies the acoustic performance requirements of ties suitable for use in separating walls (Type A ) and external walls (Type B) of new build dwellings.
Type A ties must have a measured dynamic stiffness of <4.8MN/m3 for the specified minimum cavity, at a standard density.
Type A ties throughout the site are indicated by this logo e.g. Staifix HRT4.
Type A ties must have a measured dynamic stiffness of <4.8MN/m3 for the specified minimum cavity, at a standard density.
Type A ties throughout the site are indicated by this logo e.g. Staifix HRT4.
Staifix HRT4
All Ancon ties which cross a cavity meet the requirements of Type B.
How the dynamic stiffness of wall ties is measured
The ends of six samples of each tie are cast into 100mm square concrete blocks, the blocks are suspended, one block excited and the frequency response measured. From these tests the mean dynamic stiffness is calculated for the specific cavity and multiplied by the tie density (usually 2.5 tie/m2. The results are shown in MN/m3.
www.ancon.com.au
www.ancon.at
www.ancon.ch
www.anconbp.de
