1875, St. Helier, Jersey
Ancon Isotec thermal break has been installed at the balcony locations on this stylish residential development.Find out more
Clyde Tunnel Refurbishment
Ancon manufactured a bespoke stainless steel support framework used to fix a new architectural fire-resistant tunnel liningFind out more
James Hehir Building, Suffolk
Ancon Lockable Dowels replaced traditional pour strips at both wall-to-wall and wall-to-slab junctions on this UK projectFind out more
Emergency Care Centre, Aberdeen
Over 500 Ancon Lockable Dowels replaced traditional pour strips in a new ten storey hospital building in Aberdeen.Find out more
Broadside, Chatham Maritime
A brick support system was designed for this four storey screen wall, curved on planFind out more
St Mary's Catholic College
400 metres of stainless steel brick support angle have been supplied to this new college in BlackpoolFind out more
TeploTie Used in British Passivhaus
Ancon TeploTies have been used in the first certified Passivhaus to be built using masonry cavity walls.Find out more
KSN Anchors create high performance joints quickly and more safely than re-bend continuity boxes which involve rebar straightening. The system also easily accommodates EC2 lap lengths.
Used within a slab to provide additional reinforcement around columns, CARES-approved and EC2-compliant Ancon Shearfix is the ideal solution to the design and construction problems associated with punching shear
Ancon Balcony Connectors provide a thermal break between an external balcony and an internal structural frame, where fixings pass through the building envelope.
Ancon's range of low thermal conductivity wall ties includes the BBA-approved Ancon TeploTie, which is manufactured from basalt fibres and has a thermal conductivity of 0.7W/mK.
The use of reinforcing bar couplers simplifies design and reduces the amount of reinforcement required. The Ancon range includes parallel-threaded, tapered threaded and mechanically bolted couplers.
Lockable Dowels replace the use of one-metre 'pour strips' in post-tensioned concrete frames, reducing slab propping time, improving site access and accelerating the rate of construction.
New software from Ancon simplifies the design of its award-winning KSN Anchor rebar continuity system in wall to slab construction joints, providing safer, faster concrete connections on site.
From 1st July 2014, the CE Marking of structural steelwork became a legal requirement. Ancon is proud to have offered the Industry a fully CE-compliant range since July 2013 - a full year ahead of the industry deadline.
These new data-rich BIM Objects allow Ancon products to be easily incorporated into a 3D building model and its associated component database.
Putting Corporate Social Responsibility into Practice
Ancon is committed to ethically and responsibly managing all aspects of its operations. Read exactly what this means in practice in our CSR report.
Our facilities employ strict energy-management and waste-minimisation procedures, following the principles of lean manufacturing.
Downloads librarySee downloads
Latest Blog Posts
This is a question Ancon’s Technical Services Team is regularly asked by those specifying and purchasing support systems for masonry...
Energy efficiency is becoming increasingly important in today’s building designs and the thermal performance of the insulated building...