Skip to content
Movement Tie

Ancon Movement Ties

Movement Ties

Ancon PPS/PPB/PPV/PP21 Movement Tie

Debonding sleeves are used on plain-ended wall ties at vertical movement joints that abut columns. The tie will restrain the masonry against lateral wind loads but the sleeve will allow the masonry to expand or contract.

Debonded ties should be installed with a 10mm gap at the end of the sleeve to allow for expansion of the masonry.

PPS Movement Tie

Debonding Sleeve

Debonded ties require 100mm embedment. A 120mm long sleeve will provide an allowance for movement and tolerance, and will be suitable for most applications. Other lengths and sizes available to special order.

NBS Source

Building Information Modelling

For a BIM Object of this product, please click here or visit NBS Source.



Movement Ties for use with Cellular Clay Blockwork

We have developed movement ties for use with cellular clay blockwork, where the horizontal bed joints are just 1mm. They are manufactured from corrosion-resistant stainless steel and are suitable for use in housing an commercial applications.

Ancon CCB-SMJ-200

Movement tie for fixing back to steelwork and existing masonry.

The CCB-SMJ-200 is supplied in a standard length of 110mm

Ancon CCB-TMJ-200

Movement tie for use in vertical movement joints

The CCB-TMJ-200 is supplied in a standard length of 180mm

Latest News

Leviat Expands Its Range of Non-Combustible Clips

Leviat, leading manufacturer of engineered construction solutions, has launched its second non-combustible clip to the range - the Ancon A1-S Insulation Retaining Clip. This new A1-rated, non-combustible clip has been specifically designed for use with Ancon flat wall ties, including SDB, SD21 and YDB.