Skip to content

Reveal Support Plates 

The Ancon Reveal Support Plate is designed to aid in the construction of a brick window reveal.

Standard reveal plates are available to suit a 215mm and a 327.5mm window reveal. The plate is bonded into the bed joint of the outer leaf to provide a stable bearing onto which the brick reveal is constructed. Reveal plates are only required at the base of reveals - there is no need to install additional plates in the upper courses of brickwork.

The long leg of the plate is built into the external leaf of masonry with the arrow pointing towards the building. To ensure stability, the outer leaf should be built at least one course higher than the reveal bricks at all stages.

Ancon Reveal Support Plate to suit 215mm window reveal

Brick piers with 215mm deep reveals will need to be a minimum of 552.5mm wide to accommodate 2No. reveal plates adjacent to one another.

Ancon Reveal Support Plate to suit 327.5mm window reveal

Brick piers with 327.5mm reveals will need to be a minimum of 1452.5mm wide to accommodate two reveal plates, adjacent to one another.


For other reveal depths, please contact us.

Latest News

Leviat ensures HS2 tunnel construction remains on track with the creation of rebar facility

The Skanska Costain STRABAG joint venture (SCS JV) turned to Leviat for training, specialist equipment and ongoing support in order to create an on-site steel threading facility capable of producing the required 92,000 rebar couplers. This innovative and cost-effective rebar facility removes the risk of delays, enables new jobs, reduces lorry movements and cuts waste.