Steel Frame Edge Trim
Steel Frame Edge Trim
Ancon CombiDeck edge support is supplied with an integral channel section that accepts standard Ancon ‘T’ Head Bolts and has been developed for use with the permanent metal deck shuttering of steel framed structures.
CombiDeck is manufactured in corrosion resistant steel with either a stainless steel or galvanised steel channel. Alternatively the complete assembly can be manufactured in stainless steel. The channel welded into the edge support will usually be Ancon 30/20, positioned 55mm below the top.
The thickness of the floor slab will determine the capacity of the support system. A 130mm thick slab will limit the height of single skin brickwork to 4 metres. Thicker slabs will permit more masonry to be supported.
Most Ancon support systems can be used with CombiDeck.
Details for specifying and ordering
The CombiDeck edge support is specified as follows:
CombiDeck / channel size / height of edge
e.g. CombiDeck / 30 / 140
This will have a 30/20 channel and will suit a floor with a depth of 140mm.
Latest News
Ancon Masonry Support Systems Achieve CCPI Conformance
Ancon Masonry Support Systems have achieved CCPI Conformance following a rigorous assessment process. The milestone reinforces Leviat's commitment to providing clear, accurate and accessible product information for masonry support solutions used across the UK construction industry.
New Ancon A1-25/14 Non-Combustible Clip Delivers Easier Installation Without Compromise
Introducing the third non‑combustible clip in the range: the Ancon A1‑25/14 Insulation Retaining Clip. This new A1-rated, non-combustible clip has been specifically designed for use with Ancon 25/14 channel restraint system.