Products
Masonry

Wall ties and restraint fixings are an essential element in the stability of masonry panels.
Wall Ties & Restraint Fixings

Brick, block or stone cladding on steel or concrete framed structures is normally supported by stainless steel masonry support systems.
Masonry Support

Ancon Lintels are manufactured from stainless steel and do not require any further corrosion protection.
Lintels

Ancon Masonry Reinforcement, otherwise known as Bed Joint-Reinforcement, improves the structural performance of masonry walls by providing additional resistance to lateral loads e.g. wind.
Masonry Reinforcement

Ancon Windposts are designed to span vertically between floors to provide lateral support for panels of brickwork.
Windposts

There are various methods of fixing to concrete or steel frames.
Channel & Bolt Fixings
Concrete

Leviat manufactures six Ancon products which provide continuity of reinforcement at slab-to-wall construction joints in concrete.
Reinforcement Continuity Systems

Ancon connectors minimise heat loss at balcony locations while maintaining structural integrity.
Insulated Balcony Connectors

Used within a slab to provide additional reinforcement around columns, Ancon Shearfix is the ideal solution to the design and construction problems associated with punching shear.
Punching Shear Reinforcement

Concrete structures are designed with expansion and contraction joints to allow movement to take place.
Shear Load Connectors

Ancon KSN Anchors, in combination with Bartec Plus parallel-threaded reinforcing bars, simplify concrete construction joints.
KSN Anchors

The use of Ancon Reinforcing Bar Couplers can simplify the design and construction of reinforced concrete and reduce the amount of reinforcement required.
Reinforcing Bar Couplers

The CB Coupler Box utilises the Ancon CARES-approved CXL mechanical rebar connection system to simplify the continuity of reinforcement at concrete construction joints.
CB Coupler Box

There are various methods of fixing to concrete or steel frames.
Channel & Bolt Fixings
Steel

Tie bars are increasingly being used in structures and buildings as an architectural as well as a structural element.
Tension & Compression Systems
Leviat is a manufacturer of Ancon specialist products and has a wealth of experience in working with a range of types and grades of stainless steel.
Stainless Steel Fabrications

Ancon Staifix wire balloons are a simple and effective way of preventing nesting birds, leaves and other debris from entering chimney flues and downpipes.
Wire Balloons

The Ancon ACC is a blue, galvanised steel, self-tapping screw specially designed for use in the construction of loadbearing timber-concrete composite floors.
Composite Floor Fixings
Latest News
Catch up on the latest developments from Ancon
Ask the Expert: Coupler & Continuity Systems
For our final ‘Ask the Expert’ of 2024 we sat down with Neil Loy, Commercial Manager for Rebar Splicing at Leviat to find out about reinforcement continuity systems and considerations for their use in infrastructure projects.
Introducing the New Face of Ancon Staifix
Leviat is set to revolutionise the construction fixing market with a comprehensive brand refresh of its established Ancon Staifix range of wall ties and restraints, delivering enhanced value and visibility, and a suite of in-store marketing materials for builders' merchants in 2025.
Leviat upgrades Ancon Optima range to provide more economical solutions for single storey lifts and wider cavities
Engineered connection specialist, Leviat, has responded to growing customer requests for a faster and more efficient brickwork support solution for lower loads with the launch of two major new products, Ancon Optima 6 and Ancon Optima 8.