Products

Wall ties and restraint fixings are an essential element in the stability of masonry panels.

Brick, block or stone cladding on steel or concrete framed structures is normally supported by stainless steel masonry support systems.

Ancon Lintels are manufactured from stainless steel and do not require any further corrosion protection.

Ancon Masonry Reinforcement, otherwise known as Bed Joint-Reinforcement, improves the structural performance of masonry walls by providing additional resistance to lateral loads e.g. wind.

Ancon Windposts are designed to span vertically between floors to provide lateral support for panels of brickwork.

There are various methods of fixing to concrete or steel frames.

Leviat manufactures six Ancon products which provide continuity of reinforcement at slab-to-wall construction joints in concrete.

Ancon connectors minimise heat loss at balcony locations while maintaining structural integrity.

Used within a slab to provide additional reinforcement around columns, Ancon Shearfix is the ideal solution to the design and construction problems associated with punching shear.

Concrete structures are designed with expansion and contraction joints to allow movement to take place.

Ancon KSN Anchors, in combination with Bartec Plus parallel-threaded reinforcing bars, simplify concrete construction joints.

The use of Ancon Reinforcing Bar Couplers can simplify the design and construction of reinforced concrete and reduce the amount of reinforcement required.

The CB Coupler Box utilises the Ancon CARES-approved CXL mechanical rebar connection system to simplify the continuity of reinforcement at concrete construction joints.

There are various methods of fixing to concrete or steel frames.

Tie bars are increasingly being used in structures and buildings as an architectural as well as a structural element.

Leviat is a manufacturer of Ancon specialist products and has a wealth of experience in working with a range of types and grades of stainless steel.

Ancon Staifix wire balloons are a simple and effective way of preventing nesting birds, leaves and other debris from entering chimney flues and downpipes.

The Ancon ACC is a blue, galvanised steel, self-tapping screw specially designed for use in the construction of loadbearing timber-concrete composite floors.