Ancon PPS/PPB/PPV/PP21 Movement Tie
Debonding sleeves are used on plain-ended wall ties at vertical movement joints that abut columns. The tie will restrain the masonry against lateral wind loads but the sleeve will allow the masonry to expand or contract.
Debonded ties should be installed with a 10mm gap at the end of the sleeve to allow for expansion of the masonry.
Debonded Ties require 100mm embedment. A 120mm long sleeve will provide an allowance for movement and tolerance, and will be suitable for most applications. Other lengths and sizes available to special order.
Building Information Modelling
Movement Ties for use with Cellular Clay Blockwork
Ancon has developed movement ties for use with cellular clay blockwork, where the horizontal bed joints are just 1mm. They are manufactured from corrosion-resistant stainless steel and are suitable for use in housing an commercial applications.
Movement Tie for fixing back to steelwork and existing masonry
Movement Tie for use in vertical movement joints
Successfully re-engineered by Ancon, the IHR range of internal head restraints can now accommodate gaps at the wall head of up to 75mm, extending the previous maximum of 50mm.
Ancon has been honoured at a Royal reception to celebrate its success in the 2018 Queen’s Awards for Enterprise – the third Queen’s Award for the company.