Blog
Reinforcement Continuity Systems for Modern Construction
Concrete construction techniques continue to evolve in response to demands for safer, faster, and more efficient site operations. In recent years, the requirements of revised standards such as Eurocode 2 (BS EN 1992:1-1:2023) have increased the lap lengths for reinforcing bars, bringing new challenges for engineers and contractors. Neil Loy discusses how Leviat have adapted to help this. Read more

Engineering Innovation in The Wave
Referred to as 'The Wave', the University of Sheffield's new Faculty of Social Sciences (FOSS) building, is a stunning example of modern architectural design combined with advanced engineering solutions. The building's fluid, curved form wrapped in glass is as much a technical achievement as it is an aesthetic one. Leviat, working alongside other key contractors, played a vital role in delivering concrete solutions that helped bring the ambitious design to life. Neil Loy of Leviat reports. Read more

Ask the Expert: Coupler & Continuity Systems
For our final ‘Ask the Expert’ of 2024 we sat down with Neil Loy, Commercial Manager for Rebar Splicing at Leviat to find out about reinforcement continuity systems and considerations for their use in infrastructure projects. Read more

Ask the Expert: Balcony Connectors
Next in our 'Ask the Expert' series, we sit down with Nicolas De Vrieze, Product Manager, Structural Thermal Breaks & Acoustics and Nobert Omony, Lead Engineer, Structural Connections & Fixings at Leviat as they discuss the importance of balcony connectors. Read more


Updated Guidance on Dealing with Redundant Cast-in Channels in Close Proximity
Here, masonry support specialist, Leviat, provides details of how redundant cast-in channels should be treated when located in close proximity to post-fixed anchors. Read more

Ask the Expert: Masonry Support Systems
Jonathan Vaughan, Technical Manager and Jeff Edwards, Engineering Manager for Leviat’s Masonry division discuss masonry support systems. Read more

Leviat Appoints its First Ever Environmental & Sustainability Engineer
Jess Marsh is at the start of her career as Leviat’s first ever Environmental and Sustainability Engineer based at the world-leading construction accessory company’s UK head office in Sheffield. She is looking forward to supporting Leviat on its journey to a net zero future. Read more

Continuous product improvement results in quicker and easier install for the Ancon Teplo-Tie
Installation of Leviat’s Ancon Teplo-BF low-thermal conductivity wall ties is now quicker and easier following continuous product improvement and development. As a popular product in energy efficient construction, the reduction in material wastage is an added benefit. Read more

Latest News
New EPDs for Key Product Ranges
Environmental Product Declarations (EPDs) covering two key masonry support and restraint solutions from our trusted Ancon product range are now available. Architects, engineers and contractors can now access these verified documents which provide clear, comparable data on the full lifecycle impact of our products.
New Ancon Staifix Packaging: Built for strength, designed for clarity
Leviat’s brand refresh of its established Ancon Staifix range introduces bold, fresh, and sustainable new packaging – designed for visibility, strength, and reliability.